Shingle-Over Vent • Air Vent Inc.
The Edge™ Vent is a shingle-over, roof-top installed intake vent that keeps the roofer on the roof controlling the project. The vent has a patented internal baffle and drainage system along with internal weather filter to provide three levels of weather protection. The Edge Vent can be installed on roofs with or without overhangs and be placed up the roof with open-soffit construction. As part of The Balanced System® for optimum attic ventilation, it provides 9 square inches of net-free area per linear foot. It also passed a stringent 30-day ice dam test.
Cleanable Soffit Vent • Max Flo Vent
Attic exhaust components like ridge vents, turbines and power vents all have one thing in common: they need intake air to properly function. The soffit vent works to give the proper intake for the exhaust component. Over time the traditional, properly functioning soffit vent becomes clogged with debris and dirt. Until now there has been no way to service the vent after it becomes clogged. The Max Flo Vent is a proudly made-in-the-USA steel vent with a removable, cleanable, perforated aluminum screen.
Ridge Vent for Tile Roofs • TRA Snow and Sun
TRA Snow and Sun’s RidgeRiser® and TileVent enable a very simple roof concept that allows air to vent out at the ridge of a tile roof. The patented RidgeRiser opens up the sheathing at the ridge. It is made of galvanized steel and requires nothing but nails and a two-by-two to create the ideal solution at the ridge. The flexible ridge vent, made of full aluminum or copper, conforms and adheres to the profile of the tile providing 10 square inches of net-free airflow per running foot. ICC Approval #ESR-1787.
Intake Vent • Owens Corning
The VentSure® InFlow® Vent is a versatile intake vent for soffit-less, open soffit and traditional roofs, providing up to 10 square inches of NFVA per lineal foot. The VentSure InFlow Vent’s innovative design helps protect against wind-driven rain and offers a clean, smooth profile that blends with the roof’s aesthetics. This product is available in 4-foot sections and can be installed at the eave or mid-roof. As part of the Owens Corning™ Total Protection Roofing System™, VentSure intake and exhaust products are designed to work together to deliver the quality and performance you expect.
Under-Shingle Vent • DCI Products
SmartVent is a tapered, under-shingle ventilation product designed for installation under any shingle course to provide continuous ventilation where it’s needed. It allows cool air to flow through a 1-inch roof decking slit providing more than adequate ventilation wherever it’s installed. Mostly used for intake ventilation for homes with little or no soffit overhang, SmartVent’s uses don’t stop there. SmartVent has been field tested since 1999, is Miami Dade County Hurricane and New England Ice Dam Approved, and is listed with the International Code Council (ESR-2484).
Commercial Ventilation System • Atlas Roofing
The Techni-Flo™ Engineered Ventilation System by Atlas Roofing can be used for both standing seam and shingled steep-slope commercial roofs. It allows consistent intake and exhaust airflow and has three components: Techni-Flo EV (eave vent), ACFoam® CrossVent® and Techni-Flo RV (ridge vent). The RV component has been tested to hold more than five times the average load in most snow regions. The Atlas ACFoam CrossVent (and its radiant barrier counterpart, CrossVent RB) combines a nailable polyiso surface, insulation and ventilating airspace all in one panel. The EV unit provides a prescribed roof ventilation capacity.
Weather-Resistant Roof Vent • Duraflo
With the WeatherPRO® Series there’s no need to worry about foul weather. The unique baffle system within the WeatherPRO Series wards off driving snow and blistering rain. It uses internal baffling and a patent-pending moisture control system to stop weather from entering the home. Cold impact and UV resistant, the PRO 75 ventilates 75 square inches of protected airflow, regardless of the climate.
Ridge Vent Systems • Cor-A-Vent Inc.
Cor-A-Vent® is the one solution for all your ridge vent applications. With more than 30 years of job-proven experience and a simple, straightforward design, Cor-A-Vent is the vent of choice by quality builders nationwide. The company now offers the new Revolution Rolled Ridge Vent.
Natural Ventilator • The Bilco Company
Firelight is a glazed, natural ventilator that can be installed in a glass atrium or directly onto the roof of a building. The dual-purpose ventilator provides both day-to-day and smoke ventilation and is available with several options for automated climate control. Colt ventilation products provide highly energy-efficient solutions to maintain comfortable internal climates, and to control smoke in an emergency situation with extremely low operating and maintenance costs.
